九江外贴式橡胶止水带放哪 131 6657 0832
九江外贴式橡胶止水带放哪九江外贴式橡胶止水带放哪九江外贴式橡胶止水带放哪九江外贴式橡胶止水带放哪九江外贴式橡胶止水带放哪九江外贴式橡胶止水带放哪九江外贴式橡胶止水带放哪
外贴式橡胶止水带是采用国家标准GB18173.2-2006《高分子防水材料止水带》组织生产的。因此可以按用户要求生产各种形状、尺寸的橡胶止水带，另外还为不同工程、不同部位的需要备有十字型，丁字型、斜度型和内外转角型产品，可适用于任何设计要求。在止水带产品在运输时，应避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所最好保持-10℃－+30℃，相对湿度在40%－80%。背贴式橡胶止水带适用范围：应用于地下构筑物、水坝、贮水池、游泳池、屋面以及其他建筑物质和构筑物的变形缝防水。 背贴式止水带的选择可按下列方面进行：要考虑到所要接触介质（如酸、碱、盐、油、溶剂及各种腐蚀气体）对止水带的腐蚀影响。当遇有弱酸、碱类腐蚀介质时宜选用氯丁橡胶止水带。遇有油类腐蚀介质时宜选用丁腈橡胶止水带。如果当遇有霉菌侵蚀的可能时，应考虑橡胶止水带的防霉性，其等级应达到2级及2级以上。对于止水带材质的选择应考虑到使用条件，如温度的影响、紫外线及臭氧老化、多次重复变形等因素。在低温的情况下，宜选用三元乙丙橡胶止水带。
The external rubber sealing tape is produced by the national standard GB18173.2-2006 "polymer waterproof material water stop belt". Therefore according to the production of various shapes and sizes of rubber sealing requirements, need also for different parts of engineering, preparation of a cross, T-shaped, slope type and internal and external rotation type products, can be applied to any design requirements. When the water stop belt is in transportation, it should avoid direct sunlight, and do not contact with heat source, oil and harmful solvents. The finished product should be straight and flat, without heavy pressure. The best places to keep -10 +30 stored C C, relative humidity in 40%80%. The application scope of back bonded rubber water stop is applied to the deformation joint waterproof of underground structures, dams, storage tanks, swimming pools, roofs and other building materials and structures. The selection of the back type water stop belt can be carried out according to the following aspects: taking into account the corrosive effects of the contacting medium (such as acid, alkali, salt, oil, solvent and various corrosive gases) on the water stop zone. When the weak acid and alkali corrosion medium are used, the chloroprene rubber water stop belt should be selected. Acrylonitrile butadiene rubber waterproof Belt should be selected in case of oil corrosion medium. If the possibility of mold erosion occurs, the mildew resistance of rubber water stop belt should be considered, and the grade should be above 2 and above 2. For the selection of water stop material, the conditions should be taken into account, such as the influence of temperature, ultraviolet and ozone aging, repeated deformation and other factors. In the case of low temperature, three yuan EPDM rubber belt should be chosen.
九江外贴式橡胶止水带放哪
Back stick type rubber waterstop mainly with natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, H type, type, E type and Q type etc.. According to the usage, the back - up rubber waterproof belt can be classified as the embedded rubber water stop belt and the back - mounted rubber water stop belt.
技术标准
technical standard
背贴式橡胶止水带是采用国家标准GB18173.2-2000《高分子防水材料止水带》组织生产的。 因此我们可以按用户要求生产各种形状、尺寸的橡胶止水带，另外还为不同工程、不同部位的需要备有十字型，丁字型、斜度型和内外转角型产品，可适用于任何设计要求。在止水带产品在运输时，应避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所最好保持-10℃-+30℃，相对湿度在40%-80%。背贴式橡胶止水带适用范围：应用于地下构筑物、水坝、贮水池、游泳池、屋面以及其他建筑物质和构筑物的变形缝防水。
Back mounted rubber waterproof belt is produced by national standard GB18173.2-2000 "polymer waterproof material stop belt". Therefore, we can according to the production of various shapes and sizes of the rubber sealing belt to user requirements, but also for different parts of engineering, preparation of a cross, T-shaped, slope type and internal and external rotation type products, can be applied to any design requirements. When the water stop belt is in transportation, it should avoid direct sunlight, and do not contact with heat source, oil and harmful solvents. The finished product should be straight and flat, without heavy pressure. The storage place should be kept at -10 C -+30 C and the relative humidity at 40%-80%. The application scope of back bonded rubber water stop is applied to the deformation joint waterproof of underground structures, dams, storage tanks, swimming pools, roofs and other building materials and structures.
性能原理
Performance principle
九江外贴式橡胶止水带放哪
Back mounted rubber water stop is a kind of high elasticity made of rubber, which produces elastic deformation under various loads, so as to achieve strong sealing, effectively prevent leakage of building structure, seepage and play a role of shock absorption and buffering. In many engineering architectural design, there are certain requirements between the telescopic construction, soil structure, and there are problems such as waterproof and shockproof, so using and installing the rubber sealing strip is effective means to solve these problems.
九江外贴式橡胶止水带放哪
