聚氨酯防水涂料价格

聚氨酯防水涂料是由异氰酸酯、聚醚等经加成聚合反应而成的含异氰酸酯基的预聚体，配以催化剂、无水助剂、无水填充剂、溶剂等，经混合等工序加工制成的单组分聚氨酯防水涂料。
Polyurethane waterproof coating is composed of isocyanate, polyether and other polymerization reaction by isocyanate containing prepolymer, and with catalyst, anhydrous additives, anhydrous filling agent, solvent and so on, through mixing and other processes to prepare a single component polyurethane waterproof coating.
该类涂料为反应固化型(湿气固化)涂料、具有强度高、延伸率大、耐水性能好等特点。对基层变形的适应能力强。聚氨酯防水涂料是一种液态施工的单组分环保型防水涂料，是以进口聚氨酯预聚体为基本成份，无焦油和沥青等添加剂。它是空气中的湿气接触后固化，在基层表面形成一层坚固的坚韧的无接缝整体防膜。
The coatings are reactive curing (moisture curing) coatings with high strength, high elongation, good water resistance and so on. Strong adaptability to deformation at the base. Polyurethane waterproof coating is a liquid based one component environmentally friendly waterproof coating. It is based on imported polyurethane prepolymer, without tar and asphalt additives. It is cured in contact with the moisture in the air and forms a firm, tough, seamless, integral film on the base surface.
(1) 能在潮湿或干燥的各种基面上直接施工
(1) direct construction on wet or dry surfaces
(2) 与基面粘结力强，涂膜中的高分子物质能渗入到基面微细细缝内，追随型强。
(2) and surface adhesion strong, polymer material in the coating film can seep into the surface of fine seam, following strong.
(3) 涂膜有良好的柔韧性，对基层伸缩或开裂的适应性强，抗拉性强度高。
(3) the coating has good flexibility, high flexibility and high tensile strength.
(4) 绿色环保，无毒无味，无污染环境，对人身无伤害。
(4) green environmental protection, non-toxic, tasteless, no pollution environment, no harm to human body.
(5) 耐候性好，高温不流淌，低温不龟裂，优异的抗老化性能，能耐油、耐磨、耐臭氧、耐酸碱侵蚀。
(5) good weather resistance, high temperature does not flow, low temperature does not crack, excellent anti-aging properties, resistance to oil, wear, ozone, acid and alkali erosion.

聚氨酯防水涂料价格
(6) 涂膜密实，防水层完整，无裂缝，无针孔、无气泡、水蒸气渗透系数小，既具有防水功能又有隔气功能。
(6) the coating is dense, the waterproof layer is complete, no cracks, no pinholes, no bubbles, and the water vapor permeability coefficient is small. It has waterproof function and gas separation function.
(7) 施工简便，工期短，维修方便
(7) the construction is simple, the construction period is short and the maintenance is convenient
(8) 根据需要，可调配各种颜色
(8) according to the needs, can deploy a variety of colors
(9) 质轻，不增加建筑物负载
(9) lightweight, without increasing building load
(1)单组份聚氨酯防水涂料
(1) one component polyurethane waterproof coating
单组份聚氨酯防水涂料是以异氰酸酯、聚醚为主要原料，配以各种助剂制成的反应型柔性防水涂料。该产品具有良好的物理性能，粘结力强，常温湿固化。有的聚氨酯防水涂料涂刷出的膜有稍微发粘的情况，在性能达标的情况下，也属于合格。
One component polyurethane waterproof coating is made of isocyanate and polyether as the main raw material, reaction type flexible waterproof coating prepared by mixing various additives. The product has good physical properties, strong adhesion and moisture curing at room temperature. Some polyurethane waterproof coating brushing the film has slightly sticky situation, in the performance of the standard, also belong to qualified.
一、性能、特点
First, performance and characteristics
1. 产品具有高强度、高延伸率、高固含量、粘结力强。
1. products with high strength, high elongation, high solid content, strong adhesive force.
2.自然流平，延伸性好，能克服基层开裂带来的渗漏。
2. natural leveling, good extensibility, can overcome the leakage caused by cracking at the base.
3.常温施工，操作简便，无毒无害，耐侯性、耐老化性能优异。
3. normal construction, the operation is simple, non-toxic, corrosion resistance, aging resistance.
4.施工方便，克服了双组份聚氨酯防水涂料需计量搅拌的缺点，保证了产品质量稳定和工程的防水效果。
4., the construction is convenient, overcome the double component polyurethane waterproof coating need to measure the mixing disadvantage, ensure the product quality stability and engineering waterproof effect.