651型橡胶止水带价格
651橡胶止水带是止水带的一种常用型号,属于中埋式止水带,中心孔两侧各有3个突起的楞,651型橡胶止水带是止水带产品里使用最广泛的止水带。
651 rubber water stop is a common type of water stop belt. It belongs to the middle buried waterstop. There are 3 protrusion lute on each side of the center hole. The 651 type rubber water stop is the most widely used waterstop belt in the water stop product.
651橡胶止水带是止水带的一种常用型号,属于中埋式止水带,中心孔两侧各有3个突起的楞,651型橡胶止水带是止水带产品里使用最广泛的,常用的中埋式止水带还有652型、653型等。
651 rubber water stop is a common type of water stop belt. It belongs to the middle buried waterstop. There are 3 protrusion lute on each side of the center hole. The 651 type rubber water stop is the most widely used product in the waterstop products, the commonly used buried waterstop and the 652 type, 653 type and so on.
651橡胶止水带是我公司专业生产橡胶止水带是利用橡胶的高弹性,在各种荷载下产生弹性变形,从而起到坚固密封,有效地防止建筑构造的漏水,渗水并起到减震缓冲作用。
651 rubber water stop is our company specializing in the production of rubber water stop. It is the use of high elasticity of rubber, elastic deformation under various loads, so as to play a solid seal, effectively prevent the leakage of building structure, water seepage and play the role of shock absorption.
651型橡胶止水带价格
在许多工程建筑设计中,土建、水土结构之间都有一定的伸缩要求,并存在防水防震等问题,因此采用和安装橡胶止水带是有效地解决以上种种问题的手段。本产品主要用于混凝土现浇时设在施工缝及变形缝内,与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等,确保工程建设的使用寿命。
In many engineering building designs, there are certain requirements for expansion and contraction between civil structures and water and soil structures, and there are problems such as water and shock proof. Therefore, the installation and installation of rubber water stop is an effective way to solve these problems. This product is mainly used for concrete cast-in-place engineering, underground facilities, tunnel culverts, water conveyance aqueducts and water retaining dams, which are built in the construction joints and deformation joints, and ensure the engineering construction life.
橡胶止水带的生产完全采用国家GB18173.2-2000《高分子防水材料-止水带》标准组织生产的。可按用户要求生产各种止水带形状、尺寸的产品,另外还为不同工程、不同部位的需要备有十字型,丁字型、斜度型和内外转角型橡胶止水带接头产品,可适用于任何设计要求。
The production of rubber water stop belt is produced by the national standard GB18173.2-2000 "polymer waterproof material - water stop belt". We can produce all kinds of products with various shapes and sizes according to user's requirements. Besides, there are cross type, T-type, slope type and inside and outside corner type rubber water stop joint products for different engineering and different parts, which can be applied to any design requirement.