背贴式橡胶止水带型号
背贴式橡胶止水带主要以天然橡胶与各种合成橡胶为主要原料,掺加各种助剂及填充料,经塑炼、混炼、压制成型,其品种规格较多,有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。
Back stick type rubber waterstop mainly with natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, H type, type, E type and Q type etc..
背贴式橡胶止水带主要以天然橡胶与各种合成橡胶为主要原料,掺加各种助剂及填充料,经塑炼、混炼、压制成型,其品种规格较多,有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。背贴式橡胶止水带根据使用情况又可分类为中埋式橡胶止水带和背贴式橡胶止水带。
Back stick type rubber waterstop mainly with natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, H type, type, E type and Q type etc.. The back sticking rubber sealing belt can be classified into buried rubber water stop belt and back sticking rubber sealing belt according to its use.
背贴式橡胶止水带是采用国家标准GB18173.2-2000《高分子防水材料止水带》组织生产的。 因此我们可以按用户要求生产各种形状、尺寸的橡胶止水带,另外还为不同工程、不同部位的需要备有十字型,丁字型、斜度型和内外转角型产品,可适用于任何设计要求。
The back sticking rubber water stop belt is produced by the national standard GB18173.2-2000 "high polymer waterproof material water stop belt". Therefore, we can produce various shapes and sizes of rubber water stop according to user requirements. Besides, there are cross type, T-shaped, oblique and inside and outside corner products for different engineering and different parts, which can be applied to any design requirement.
背贴式橡胶止水带型号
在止水带产品在运输时,应避免阳光直射,勿与热源、油类及有害溶剂接触。成品应取直平放,勿加重压。存放场所最好保持-10℃-+30℃,相对湿度在40%-80%。背贴式橡胶止水带适用范围:应用于地下构筑物、水坝、贮水池、游泳池、屋面以及其他建筑物质和构筑物的变形缝防水。
When the product is transported in the water stop belt, direct sunlight should be avoided, and no contact with heat source, oil and harmful solvent. The finished product should be put straight, without heavy pressure. The storage place is best maintained at -10 C -+30 C, and the relative humidity is in 40%-80%. The application area of back attached rubber water stop is applied to underground buildings, dams, storage tanks, swimming pools, roofs and other building materials and structures.
背贴式橡胶止水带是利用橡胶的高弹性,在各种荷载下产生弹性变形,从而起到坚固密封,有效地防止建筑构造的漏水,渗水并起到减震缓冲作用。在许多工程建筑设计中,土建、水土结构之间都有一定的伸缩要求,并存在防水防震等问题,因此采用和安装橡胶止水带是有效地解决以上种种问题的手段。
The back attached rubber water stop is constructed by elastic deformation of rubber under various loads, which is based on the high elasticity of rubber, so that it can play a solid seal. It can effectively prevent building structure from leaking, seepage and damping. In many engineering building designs, there are certain requirements for expansion and contraction between civil structures and water and soil structures, and there are problems such as water and shock proof. Therefore, the installation and installation of rubber water stop is an effective way to solve these problems.
本产品主要用于混凝土现浇时设在施工缝及变形缝内,与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等,确保工程建设的使用寿命。
This product is mainly used for concrete cast-in-place engineering, underground facilities, tunnel culverts, water conveyance aqueducts and water retaining dams, which are built in the construction joints and deformation joints, and ensure the engineering construction life.