您好,欢迎来到保温材料网!
保温材料网

无毒TN-1粘结剂出售

价      格面议

最小起订0 库存0

供应总量
0
最小起订
0
品牌名称
厂家区域
中国浙江嘉兴
发货期限:
自买家付款之日起 3 天内发货

企业名片

  • 公司名称浙江振阳绝热科技有限公司
  • 联 系 人于铭珏(先生)
  • 公司电话
  • 手机号码
  • 公司地址浙江省嘉兴市秀洲区王店镇庆元路562号2号楼
好货推荐

防火建筑节能隔热泡沫

面议

嘉兴无机双组份耐高低

面议

嘉兴ZNY密封胶生产厂

面议

无毒TN-1粘结剂出售

面议

嘉兴黑(白)色玛蹄脂价

面议

浙江高密度聚异氰脲酸

面议

店铺信息

所在地区:中国 浙江 嘉兴

会员级别:企业会员7

身份认证:

已  缴 纳:0.00 元保证金

我的勋章:  通过认证 [诚信档案]

在线客服:

企业名片

浙江振阳绝热科技有限公司

小程序
【温馨提示】来电请说明在保温材料网看到我们的,谢谢
产品详情

TN-1粘结剂系特殊单组份、无溶剂型聚氨酯粘结剂,基本成份为聚醚、添加料、阻燃剂、助剂等。无刺激性气味,无毒性,可室温施工。涂刷和喷涂均很方便,适用时间长。粘结后可在常温下自然固化。固化后,粘结剂不溶,防水性能极佳。可用于泡沫玻璃、聚异氰脲酸酯及聚氨酯的保冷粘结。
TN-1 adhesive is a polyurethane adhesive with special single component and non-solvent. Its basic elements are polyether, added material, flame retardants, and accessory ingredients, etc. It has no irritable smells or toxicity, and can be constructed at normal temperature. It is convenient for smearing and sputtering and has long application span. It solidifies naturally at normal temperature after adhesion, and the adhesive won’t be dissolved after solidification and has excellent waterproofing property. It is generally used as the adhesive for cold insulations, such as cellular glass, PIR-polyisocyanurate and polyurethane, etc.

产品特性/Product Property
1、外观:浅黄褐色粘稠液
2、密度:1100~1200kg/m3
3、粘度:3000~20000厘泊
4、PH值:6~8
5、粘结强度:压剪强度:≥2Mpa
6、使用温度:-196~+250℃
1. Appearance:Viscid liquid with the color of pale yellow or brown
2. Density: 1100~1200kg/m3
3. Viscosity: 3000~20000 centipoises
4. PH Value: 6~8
5. Adhesive Strength: compressive shearing strength: ≥2Mpa
6. Service Temperature: -196~+250℃

使用方法/Usage
1、表面处理:应先清除粘结面上的油污或灰尘。
2、涂胶:采用单面上胶法,用锯齿式刮刀或喷涂设备将胶液均匀地涂布在基面上。
3、贴合:将待粘材料,铺放在涂胶的基面上,粘贴后可不加压,若稍许加压效果更好。
4、固化:在25℃,RH为100%(湿度),在4小时内即可达到粘结强度,以特殊加工后,冬天也能达到同样效果,常温下24至48小时即可使用。
1、Surface treatment: Removing the oil stains or dust on the face before bonding.
2、Smearing: Single face smearing, use a toothed scrapper or spraying equipment to homogeneously apply it onto the base.
3、Bonding: Put the material to be bonded onto the base with the adhesive. A little pressure will increase the adhesive effect.
4、Curing: Adhesive strength can be reached after 4 hours at 25℃,RH 100%. After special processing, the same effect can be reached even in winter. Under normal temperature, usage is allowed after 24~48 hours. 
反对 0举报 0 收藏 0 评论 0
免责声明

本网页所展示的有关【无毒TN-1粘结剂出售】的信息/图片/参数等由的会员【浙江振阳绝热科技有限公司 】提供,由保温材料网会员【浙江振阳绝热科技有限公司 】自行对信息/图片/参数等的真实性、准确性和合法性负责,本平台(本网站)仅提供展示服务,请谨慎交易,因交易而产生的法律关系及法律纠纷由您自行协商解决,本平台(本网站)对此不承担任何责任。您在本网页可以浏览【无毒TN-1粘结剂出售】有关的信息/图片/价格等及提供 【无毒TN-1粘结剂出售】的商家公司简介、联系方式等信息。

在您的合法权益受到侵害时,请您致电0573-82720373,我们将竭诚为您服务,感谢您对保温材料网的关注与支持!