双组份聚硫密封胶也叫做双组份聚硫建筑密封胶，双组份聚硫密封膏。按型号可分为：PG321双组份聚硫密封胶，PS852双组份聚硫密封胶，SGJL851双组份聚硫密封胶等。按模量又可分为高模量型和低模量型，高模量是指高强度低伸长率，低模量是指高伸长率低强度。按流动性又可分了非下垂型聚硫防水密封胶和自流型聚硫防水密封膏。
A two-component polysulfide sealant is also called a two-component polysulfide construction sealant, a two component polysulfide sealant. According to the model can be divided into: PG321 two-component polysulfide sealant, PS852 two-component polysulfide sealant, SGJL851 two-component polysulfide sealant, etc.. Modulus can be divided into high modulus and low modulus. High modulus means high strength and low elongation. Low modulus means high elongation and low strength. According to mobility and can be divided into non drop type polysulfide waterproof sealant and self flow type polysulfide waterproof sealing cream.
包装规格：双组份聚硫密封胶有两种
Packing specification: double component polysulfide sealant has two kinds
一纸箱包装：重量为25公斤/箱，内装6个白色塑料桶，其中五桶为白色聚硫密封胶称为A组份，每桶重量约为4.54公斤，另外一桶为黑色固化剂称为B组份，分为五个塑料包装袋包装，每袋重量约为0.46公斤。
A carton weight: 25 kg / box, in which 6 white plastic barrels, five barrels of white polysulfide sealant called A component, a barrel weighs about 4.54 kg, a black barrel curing agent called B group, divided into five plastic packaging bags, each bag the weight is about 0.46 kg.
也就是说每箱为五个组份，每个A+B组份的重量为5公斤。A组份为乳白色粘稠状聚硫密封胶，B组分黑色或者灰色粘稠状固化剂。
That is, each box contains five components, each containing 5 kg of A+B. The A component is a milky white viscous polysulfide sealant, and the B component is black or gray and thick.
重量比为10:1，每组的体积约为：0.003125立方米，可嵌填1公分*1公分伸缩缝31米左右。相当于1公分*1公分的缝隙需要嵌填0.16公斤双组份聚硫密封胶。
The weight ratio is 10:1, the volume of each group is about 0.003125 cubic meters, and it can be filled with 1 cm *1 cm, and the expansion joint is about 31 meters. Equivalent to 1 cm *1 cm gap, need to insert 0.16 kg double component polysulfide sealant.
另每箱配底涂液一小瓶，在伸缩缝注胶前十分钟，保证注胶基面干净干燥的情况下均匀的涂薄薄一层，底涂液的作用是增加聚硫密封胶与混凝土的粘结强度。
On the other end of each box with a vial of liquid coating, the expansion joint injection ten minutes before, to ensure clean and dry surface glue injection under the condition of uniformly coated with a thin layer of primer role is to increase the adhesive strength of polysulfide sealant and concrete.
二、铁桶包装：重为25公斤/箱，每桶内含两个塑料包装袋，大包装为白色聚硫密封胶，重量22.7公斤，小包装为黑色固化剂，重量为2.3公斤。重量比同样为10：1。此包装内聚硫密封胶体积为0.0156立方米，可嵌填1公分*1公分缝隙156米左右。另每桶配底涂液一小瓶，在伸缩缝注胶前十分钟，保证注胶基面干净干燥的情况下均匀的涂薄薄一层，底涂液的作用是增加聚硫密封胶与混凝土的粘结强度。
Two, drum: a weight of 25 kg / barrel containing two boxes, plastic bags, packaging is white polysulfide sealant, the weight of 22.7 kg, small package for the black curing agent, the weight of 2.3 kilograms. The weight ratio is also 10:1. This package cohesion sulfur sealant volume of 0.0156 cubic meters, can be embedded to fill 1 cm *1 cm, gap 156 meters. The other with a barrel bottom coating liquid in a vial, expansion joint injection ten minutes before, to ensure clean and dry surface glue injection under the condition of uniformly coated with a thin layer of primer role is to increase the adhesive strength of polysulfide sealant and concrete.
