沥青胶泥施工工艺

 沥青胶泥施工工艺   131 6657 0832

施工方式/沥青胶泥
Construction method / asphalt mastic
本品为配制成品，直接使用即可，把本品加热成液体后，用于施工处，涂刮皆可，固化后形成一层完整一体的橡胶高弹性胶状弹性体。为无接缝、无接头的连续封闭体系。防腐防水完工后，可做砂土掩盖保护层或其它履盖层。
This product is a finished product, which can be directly used. After heating the liquid into the liquid, it can be used in the construction department, and can be painted and scraped. After curing, it forms a whole rubber elastomer with high elasticity and elasticity. It is a seamless and jointless continuous sealing system. After the completion of anti-corrosion and waterproof, sand can be used to cover the protective layer or other cover layer.
沥青胶泥为高分子防腐防水材料，本产品为永久性防腐防水材料。，使用寿命长，施工方便。使用寿命在50年以上。1；沥青胶泥分为加温型，和不加温型（溶剂型），两种相比沥青胶泥溶剂型开桶即用施工方便，更加环保。2；溶剂型沥青胶泥，又分为厚浆型，和薄浆型，厚浆型适用于2毫米以上施工，薄浆型适用于0.3毫米以上2毫米以下施工。
Asphalt mortar is a polymer anti-corrosion waterproof material, this product is a permanent anti-corrosion waterproof material. The service life is long, and the construction is convenient. The service life is more than 50 years. 1, asphalt mortar is divided into heating type and non heating type (solvent type), compared to two kinds of asphalt mortar solvent bucket opening, that is easy to use, more environmentally friendly. 2, solvent asphalt mastic, is divided into thick pulp type and thin pulp type, thick pulp type applicable to more than 2 mm construction, thin pulp type applicable to more than 0.3 mm 2 mm below construction.
技术参数/沥青胶泥

Technical parameters / asphalt mastic
1;外 观 ： 黑色糊状
1: appearance: black paste
2；氧指数： >30%（OI）
2; oxygen index: >30% (OI)
3；粘结力： 20℃1.5kg/cm2
3; adhesive force: 20 1.5kg/cm2
4;比重： 1600～1700kg/m3
4; specific gravity: 1600 ~ 1700kg/m3

 沥青胶泥施工工艺   131 6657 0832
5；在95℃温度下，45度斜搁4小时，温度升到120℃，45度斜搁1小时无流淌起泡现象。
5; at 95 degrees of temperature, 45 degrees tilted for 4 hours, the temperature rose to 120 degrees, 45 degrees tilted for 1 hours without bubbling phenomenon.
6;抗冻性： -40℃～+95℃各悬挂2小时无开裂、无脱离。
6: frost resistance: -40 ~ +95 temperature, suspension for 2 hours, no cracking, no separation.
7;抗腐蚀性： 40%硫酸侵泡2小时无变化。
7; corrosion resistance: 40% sulfuric acid infiltration for 2 hours without change.
8使用温度： -40~95℃。
8 service temperature: -40~95.
9；吸 水 率： 室温浸泡24小时，吸水量不大于试料重量的1%。
9; water absorption at room temperature for 24 hour, water quantity is not more than 1% of the weight of the sample.
10;包装规格：30KG-35KG/铁桶
10; package: 30KG-35KG/ drum
贮存条件
Storage conditions
贮存与运输贮存温度为-5℃—45℃,避免暴晒。自出厂之日起，贮存期为2年；运输时不得倾斜或横放，应注意使容器不要损害。
Storage and transportation storage temperature is -5 - 45 degrees, avoid exposure. Since the date of shipment, storage period for 2 years; not inclined or horizontal transportation, we should pay attention to the containers do not harm.
注意事项
Matters needing attention
1、 搬运过程中轻搬、轻放，防止包装破裂。
1, handling gently, handle, to prevent packaging broken.
2、 存放于阴凉处，避免阳光爆晒。
2. Store in shady and cool place, avoid sunshine explosion.
3、 施工现场要通风，有利于干燥。
3, the construction site to ventilation, is conducive to drying.
优等特点/沥青胶泥

 沥青胶泥施工工艺   131 6657 0832

Top quality / asphalt mastic
具有适用范围广、寿命长，耐候性、抗变形、拉伸强度高、延伸率大，对基层收缩和开裂变形适应性强、抗酸性、抗碱性、防腐防水性能优越、任何复杂部位都容易施工，解决了传统防腐防水材料，如涂料立面下滑、卷材空鼓，以及复杂部份操作难的难题。完全取代于传统防腐防水材料。有着比之更好的防腐、防水、绝缘性能。
Has wide application range, long service life, weather resistance, deformation resistance, high tensile strength, large elongation rate, strong adaptability, acid resistance, alkali resistance, anticorrosion and waterproof performance, any complex parts are easy construction of grass-roots shrinkage and cracking deformation, solve the traditional waterproof anti-corrosion materials, such as paint, coil hollowing elevation decline well, part of the difficult problem of complex operation. Completely replace the traditional anti-corrosion waterproof material. It has better anticorrosion, waterproof and insulating properties than others.
适应范围/沥青胶泥
Scope of application / asphalt mastic
1、地下工程项目砼基础的底部、侧面、背面、基坑、地下室的防腐防水工程； 2、水泥基建筑物，基坑、地基、地面、桥墩、铁路、港口、码头、煤矿、油田钻探的防腐防水工程、 3、地槽、水塔、水池、冷却塔、污水池、食用清水池的防腐防水工程； 4、新旧民用建筑物、屋顶、卫生间、天沟、阳台、外墙、地下室、仓库、隧道的防腐防水及各种桥梁灌缝和各种伸缩缝的浇灌； 5、各种金属管道、钢筋、混凝土防腐工程，能防止钢筋锈蚀、延长混凝土的使用寿命。
Anticorrosive waterproof Engineering 1, underground engineering project of concrete base at the bottom, side and back, foundation and basement; 2, cement building, foundation pit, foundation, ground, pier, railway, port, wharf, mine, anti-corrosion waterproof engineering, oil drilling 3, geosyncline, water tower, cooling tower, water tank, sewage pool, food antisepsis and waterproof engineering of clean water tank; 4, new and old civil buildings, roof, balcony, bathroom, gutter, wall, basement, warehouse, tunnel and bridge waterproof anti-corrosion grouting and various joints of the water; 5, all kinds of metal pipes, steel and Concrete Anticorrosion Engineering, can prevent corrosion, prolong the service life of concrete.
种类划分/沥青胶泥
Classification / asphalt mastic
1；沥青胶泥分为加温型，和不加温型（溶剂型），两种相比沥青胶泥溶剂型开桶即用施工方便，更加环保。2；溶剂型沥青胶泥，又分为厚浆型，和薄浆型，厚浆型适用于2毫米以上施工，薄浆型适用于0.3毫米以上2毫米以下施工。
1, asphalt mortar is divided into heating type and non heating type (solvent type), compared to two kinds of asphalt mortar solvent bucket opening, that is easy to use, more environmentally friendly. 2, solvent asphalt mastic, is divided into thick pulp type and thin pulp type, thick pulp type applicable to more than 2 mm construction, thin pulp type applicable to more than 0.3 mm 2 mm below construction.

 沥青胶泥施工工艺   131 6657 0832