Neutral silicone sealant
基本用途
Basic use
1：适用于铝合金门窗，钛合金门窗，塑钢门窗安装，一般装饰填缝密封
1: suitable for aluminum alloy doors and windows, titanium alloy doors and windows, plastic steel doors and windows installation, general decorative joint sealing
2：适用于各种玻璃幕墙，铝塑板幕墙，石材干挂等耐候密封
2: suitable for all kinds of glass curtain wall, aluminum plate curtain wall, stone dry hanging and other weather sealing
3：适用于扣板门窗的粘结密封
3: suitable for bonding and sealing of buckle doors and windows
4：适用于多孔性石材，夹胶玻璃，中空玻璃，镜面玻璃，镀膜玻璃，锌质，铜质，铁质材料等粘结填缝密封。
4: applicable to porous stone, laminated glass, hollow glass, mirror glass, coated glass, zinc, copper, iron and other materials bonding sealing.
5：适用于各种玻璃，金属，铝材，瓷砖，有机玻璃，镀膜玻璃间的接缝密封
5: suitable for all kinds of glass, metal, aluminum, ceramic tile, plexiglass, coating glass joint sealing
中性硅酮密封胶的特性
Characteristics of neutral silicone sealant
1：一旦接触空气中的水分就会固化成一种坚韧的橡胶类固体的材料
1: once exposed to moisture in the air, it will solidify into a tough rubber like solid material
2：粘结力强，抗拉强度大，同时又具有耐候性，抗振性，和防潮，抗臭气和适应冷热变化大的特点
793中性硅酮密封胶固化吗
3：因其不会因为自身的重量而流动，所以可以用于过顶或侧壁的接缝而不发生下陷，塌落或流走
3: because it does not flow because of its own weight, so it can be used to over the top or side wall joints without subsidence, collapse or flow away
4：中性硅酮密封胶克服了酸性硅酮密封胶腐蚀金属材料和与碱性材料发生反应的特点
4: neutral silicone sealant overcomes the characteristics of acid silicone sealant corroding metal materials and reacting with alkaline materials
5：能很好的填充零件表面的所有凹陷并有良好的浸润性。
5: good filling of the surface of all parts of the dent and has good wettability.
6：在表面间隙中是致密的，柔韧的，在金属表面有良好的粘结性并形成连续的胶膜。
6: in the surface gap is dense, flexible, good adhesion on the surface of the metal and form a continuous film.
7：不腐蚀金属，对介质稳定。
7: no corrosion of metal, the stability of the medium.
8：能适应外界条件的变化而不失去密封性等。
8: can adapt to changes in the external conditions without losing the sealing and so on.
9：良好的耐紫外线，耐臭氧和耐气候老化性能
9: good UV resistance, ozone resistance and weathering resistance
10：良好的附着力，对大多数建材具有优异的粘结性
10: good adhesion, excellent adhesion to most building materials
施工指南
Construction guide
1：必须使溶剂，将接口处清洗干净，并保持干燥
1: must make solvent, clean the interface, and keep dry
2：如需配合使用底漆以增强其粘结性，彻底漆干后方可施工。
2: if you need to cooperate with the use of primer to enhance its cohesiveness, thoroughly dry paint before construction.
3：施工时应用密封胶将接缝完全填满，确保两面粘结。
3: use sealant in construction to fill the seams completely, ensure the bonding of both sides.
4：在需要进行保护的部位贴上胶带，但不可把胶带触及到将要施工的表面
4: put the tape on the part that needs to be protected, but don't touch the tape to the surface that will be constructed
5：在胶未固化前，立即进行修边，以达到优美的外观
793中性硅酮密封胶固化吗
6：将粘结的装置置于室温下，待胶固化。
6: the adhesive device is placed at room temperature and cured by glue.
7：将该胶均匀的涂在准备就绪的物体表面上，然后是将两个表面粘结起来，可把一面先找位置放好，再用足够的力挤压另一面以挤出空气，但注意不要挤出密封胶。
7: the glue evenly coated on the surface of the prepared ready, then two surface bonding, the side of the first place for good, with enough force to squeeze the other side out of the air, but don't squeeze sealant.
8：施工场所应特别注意保持良好的通风环境
8: the construction site should pay special attention to maintain a good ventilation environment
793中性硅酮密封胶固化吗
